SMC Networks BARRICADETM N SMCWBR11S-3GN - Manual (Page 40)

C HAPTER 4 | Initial Configuration
Setup Wizard
– 40 –
◆ Default Gateway — The IP address of the gateway router for the Mini
3G Broadband Router, which is used if the requested destination
address is not on the local subnet.
◆ Primary DNS Server — The IP address of the Primary Domain Name
Server. A DNS maps numerical IP addresses to domain names and can
be used to identify network hosts by familiar names instead of the IP
addresses. To specify a DNS server, type the IP addresses in the text
field provided. Otherwise, leave the text field blank.
◆ Secondary DNS Server — The IP address of the Secondary Domain
Name Server.
S TEP 3 - WAN
S ETTINGS - PPP O E
Enable the Mini 3G Broadband Router IP address to be assigned
automatically from an Internet service provider (ISP) through a DSL
modem using Point-to-Point Protocol over Ethernet (PPPoE).
Figure 18: Wizard Step 3 - WAN Settings - PPPoE
The following items are displayed on this page:
◆ Ethernet Port — Select “PPPoE (ADSL)” for the WAN port connection
from the drop-down list.
■
Enable MAC Clone — Some ISPs limit Internet connections to a
specified MAC address. This setting allows you to manually change
the MAC address of the Mini 3G Broadband Router's WAN interface
to match the PC's MAC address provided to your ISP for
registration. You can enter the registered MAC address manually by
typing it in the boxes provided. Otherwise, connect only the PC with
the registered MAC address to the Mini 3G Broadband Router, then
click the “Clone your PC’s MAC Address.” (Default: Disable)