SMC Networks BARRICADETM N SMCWBR11S-3GN - Manual (Page 90)

C HAPTER 7 | Wireless Configuration
Wireless Distribution System (WDS)
– 90 –
Figure 50: Manual WDS MAC Address Configuration
Figure 51: WDS Configuration Example
A WDS link between two units can be configured in any of the following
Operation Mode combinations:
1. Both units in a link are configured as Router Mode.
2.
One unit in a link is configured in Router Mode and the other in Bridge
Mode.
3.
Both units in a link are configured as Bridge Mode.
When two or more units in the WDS network are set to Router Mode, be
sure to check these settings:
◆ Be sure each unit is configured with a different LAN IP address.
Internet
Service
Provider
MAC: 00-22-2D-62-EA-11
WDS MAC List:
00-22-2D-62-EA-22
00-22-2D-62-EA-33
00-22-2D-62-EA-44
MAC: 00-22-2D-62-EA-22
WDS MAC List:
00-22-2D-62-EA-11
Cable/DSL
Modem
WDS Link
MAC: 00-22-2D-62-EA-33
WDS MAC List:
00-22-2D-62-EA-11
MAC: 00-22-2D-62-EA-44
WDS MAC List:
00-22-2D-62-EA-11 WDS
Link WDS
Link
Internet
Service
Provider
Operation Mode: Router
DHCP Server: Enable
LAN IP Address: 192.168.2.1
WDS Mode: Bridge
Operation Mode: Bridge
WDS Mode: Repeater
DHCP Server: Disable
LAN IP Address: 192.168.2.2
Cable/DSL
Modem
WDS Link
Operation Mode: Bridge
WDS Mode: Lazy
DHCP Server: Disable
LAN IP Address: 192.168.2.3
Operation Mode:
WDS Mode: Lazy
DHCP Server: Disable
LAN IP Address: 192.168.2.4 Router WDS
Link WDS
Link