Figure 31: 3g configuration - dual wan mode – SMC Networks BARRICADETM N SMCWBR11S-3GN User Manual

Page 62

Advertising
background image

C

HAPTER

6

| Network Settings

WAN Setting

– 62 –

Default Gateway — The IP address of the gateway router for the Mini

3G Broadband Router, which is used if the requested destination

address is not on the local subnet.

Operation Mode — Selects the operation mode as Keep Alive, or

Manual. (Default: Keep Alive)

Keep Alive Mode: The Mini 3G Broadband Router will periodically

check your Internet connection and automatically re-establish your

connection when disconnected. (Default: 60 seconds)

Manual Mode: The unit will remain connected to the Internet

without disconnecting.

Primary DNS Server — The IP address of the Primary Domain Name

Server. A DNS maps numerical IP addresses to domain names and can

be used to identify network hosts by familiar names instead of the IP

addresses. To specify a DNS server, type the IP addresses in the text

field provided. Otherwise, leave the text field blank.

Secondary DNS Server — The IP address of the Secondary Domain

Name Server.

3G

Enables support for a USB 3G modem as a WAN connection, either as a

primary (Master) link, or as a backup to the WAN port link.

Figure 31: 3G Configuration - Dual WAN Mode

The following items are displayed in this section on this page:

USB Port — Enables support for a WAN connection using a USB 3G

modem. When enabled, you can select if the 3G modem connection

operates as the Master or Backup WAN link. (Default: Disabled)

Master WAN — Enables the USB 3G modem WAN connection to

operate as the primary WAN link. The Ethernet WAN port then

operates as the backup link. (Default: Disabled)

Advertising