SMC Networks BARRICADETM N SMCWBR11S-3GN - Manual (Page 65)

C HAPTER 6 | Network Settings
WAN Setting
– 65 –
◆ Budget Policy — Specifies the action to take when budget limits have
been reached.
■
Action if Over Budget — Specifies the the action to take when a
budget limit has been exceeded:
■
Drop Current Connection — Immediately drop the current
connection. (Default: Enabled)
■
Disallow New Connection — Do not permit any new
connections. (Default: Enabled)
■
Trigger by Limit Budget — Specifies the percentage of the time
or data budget at which to start sending E-mail alerts at the
indicated time interval. When E-mail alerts are enabled, be sure to
configure the E-mail settings. (Default: 90% of budget, E-mail
Alerts disabled, recurring every 10 minutes)
◆ Budget Counter — Select the day of the month on which to reset the
time/data budget counters. (Default: 1st day per month)
Figure 34: 3G Configuration - E-mail Settings
The following items are displayed in this section on this page:
◆ E-mail Settings — The unit can use SMTP (Simple Mail Transfer
Protocol) to send E-mail messages when triggered by the specified
budget policy limits.
■
Mail SMTP Authentication — Specifies a user name and password
for SMTP server authentication. (Options: PLAIN, LOGIN, or
Disabled.)
■
User Name — Enter the user name for the SMTP server account.
■
Password — Enter the password for the SMTP server account.
■
Mail Server — Specifies the URL of the SMTP mail server that will
send the alert messages.
■
Mail Sender — Specifies an E-mail address on the SMTP server
that will send the alert messages.