Woodstock W1820 - Manual (Page 29)

-27-
Df[\cN(/(0&N(/)' D]^%J`eZ\()&('
J<
K
L
G
+% Put on a pair of heavy leather gloves and use the
included arbor wrenches to tighten the arbor nut
(turn clockwise to tighten), as shown in
=`^li\)..
:_\Zb`e^=\eZ\GXiXcc\c`jd
(% Slide the fence along the rail. If it drags across the
table, then adjust the foot at the rear of the fence
with a 6mm hex wrench to raise the fence off of
the table, just enough so that the gap between the
fence and the table is even from front to back.
)% Slide the fence up against the right hand edge of the
miter slot, and lock it in place. Examine how the
fence lines up with the miter slot (see
=`^li\28).
 Efk\1 @k`jg\id`jj`Yc\]fik_\YXZbf]k_\]\eZ\
kfg`mfkflknXi[efkdfi\k_Xe
( Ð
-+
]ifdY\`e^
gXiXcc\ckfk_\YcX[\%K_`jZi\Xk\jXjc`^_kcpcXi^\i
fg\e`e^Y\kn\\ek_\]\eZ\Xe[k_\i\Xif]k_\
YcX[\kfi\[lZ\k_\i`jbf]nfibg`\Z\Y`e[`e^
fiYlie`e^Xj`k`j]\[k_ifl^_k_\Zlk%DXep
nff[nfib\ij`ek\ek`feXccpj\klgk_\`i]\eZ\`ek_`j
dXee\i%B\\gk_`j`ed`e[Y\]fi\X[aljk`e^pfli
]\eZ\%=fidfi\[\kX`cjj\\=`^li\('.feGX^\.(%
— If the fence/miter slot are still parallel with the
blade, proceed to Jk\g=\eZ\JZXc\.
— If the fence is not parallel to the blade/miter
slot, then you MUST adjust the fence, as described
in
=\eZ\8[aljkd\ekj on GX^\.', so that it is
parallel to the blade.
— If the miter slot is not parallel with the blade, you
must follow the procedures described in D`k\iJcfk
kf9cX[\GXiXcc\c`jd on GX^\-..
=\eZ\JZXc\
Since the adhesive fence scale will be difficult to remove
once it installed, determine whether you will use the
pointer window on the right or the left side of the fence
before installing the scale.
The pointer window may come pre-installed on the left
side of the fence. However, we recommend loosening the
mounting screws on the window and re-installing it on the
right side of the fence (see
=`^li\)0) so workpieces will
not cover the pointer window when preparing to cut.
=`^li\).% Securing blade.
;ZcXZ^h
EVgVaaZaid
B^iZgHadi!
l]^X]^h
EVgVaaZaid
7aVYZ
B^iZgHadi
7aVYZ
;ZcXZ
=`^li\)/% Checking fence parallelism with
blade.
=`^li\)0% Aligning rail tape with scale
pointer.
Screws
Pointer
Window