SMC Networks SMC7004ABR V.2 - Manual (Page 13)

Connect the System
9
•
TCP/IP network protocol installed on each PC that needs to
access the Internet.
•
A Java-enabled web browser, such as Microsoft Internet
Explorer 5.0 or above, or Netscape Communicator 4.0 or
above installed on one PC at your site for configuring the
Barricade™ Router.
Connect the System
The Barricade™ Router can be positioned at any convenient
location in your office or home. No special wiring or cooling
requirements are needed. You should, however comply with the
following guidelines:
•
Keep the Barricade™ Router away from any heating devices.
•
Do not place the Barricade™ Router in a dusty or wet
environment.
You should also remember to turn off the power, remove the
power cord from the outlet, and keep your hands dry when you
install the Barricade™ Router.
Basic Installation Procedure
1. Connect the LAN: You can connect the Barricade™ Router to
your PC, or to a hub or switch. Run Ethernet cable from one
of the LAN ports on the front of the Barricade™ Router to your
computer’s network adapter or to another network device.
2. Connect the WAN: Prepare an Ethernet cable for connecting
the Barricade™ Router to a cable/DSL modem or Ethernet
router. Prepare a serial cable for connecting the Barricade™
Router to an ISDN TA or PSTN modem.