SMC Networks SMC7004ABR V.2 - Manual (Page 94)

Configuring the Print Server
91
Once you have completed the printer installation, you will need to
configure some properties on your printer. To do so, please
follow the steps listed below:
1. If you closed out the Printers window, please re-open it from
the control panel.
2. Locate the printer that you just installed, right-mouse click on
it, and choose Properties.
3. Click on the Advanced tab and verify the following settings:
•
Both the “Spool print documents so program finishes
printing faster” and the “Start printing after last page is
spooled” options are selected.