SMC Networks SMC7004ABR V.2 - Manual (Page 97)

95
T
ROUBLESHOOTING
The information outlined in this section describes some useful
steps for getting your computer and Barricade™ Router online.
Verify you are connected to the Barricade™ Router
If you are unable to access the Barricade™ Router’s web-based
administration pages then you may not be properly connected or
configured. The screen shots in this section were taken on a
Windows 2000 machine, but the same steps will apply to
Windows 95/98/Me/XP.
To determine your TCP/IP configuration status please follow the
steps below:
1. Click Start/Programs/Accessories/Command Prompt.
2. In the DOS window, type ipconfig and verify the information
that is displayed.
3. If your computer is setup for DHCP, then your TCP/IP
configuration should be similar to the information displayed:
•
IP Address: 192.168.2.X (where x is a number between
100 and 199)
•
Subnet Mask: 255.255.255.0
•
Default Gateway: 192.168.2.1