SMC Networks SMC7004ABR V.2 - Manual (Page 32)

Configuring Client TCP/IP
28
Manual IP Configuration
1. Follow steps 1-5 in “DHCP IP Configuration” on page 26.
2. Select “Use the following
IP Address.”
3. Enter an IP address based
on the default network
192.168.2.x (where x is
between 2 and 254), use
255.255.255.0 for the
subnet mask. and the IP
address of the
Barricade™ Router
(default: 192.168.2.1) for
the Default gateway field.
4. Select “Use the following
DNS server addresses.”
5. Enter the IP address for the Barricade™ Router in the Preferred
DNS server field. This automatically relays DNS requests to
the DNS server(s) provided by your ISP. Otherwise, add a
specific DNS server into the Alternate DNS Server field and
click OK to close the dialog boxes.
6. Record the configured information in the following table.
7. Click OK to close the dialog box.
TCP/IP Configuration Setting
IP Address ____.____.____.____
Subnet Mask ____.____.____.____
Preferred DNS Server ____.____.____.____
Alternate DNS Server ____.____.____.____
Default Gateway ____.____.____.____