SMC Networks SMC7004ABR V.2 - Manual (Page 85)

Print Server Setup
82
4. Enter the IP address of the Barricade™ Router and click OK,
and then click Next in the Add Printer Wizard dialog box.
5. Specify the printer type attached to the Barricade™ Router.
6. Continue following the prompts to finish installing the
Barricade™ Router print server. The printer type you
specified will now be added to your Printers menu.
Configuring the Network Printer in Unix Systems
Follow the traditional configuration procedure on Unix platforms
to set up the Barricade™ Router print server. The printer name is
lpt1.
Configuring LPR port on Windows 2000/XP
The Barricade™ Router printer function can also be used with
the LPR (Remote Line Printer) port on Windows XP and
Windows 2000 machines. Below is an outline on how to
configure the LPR port on a Windows 2000 machine;
however the same steps will apply for a Windows XP.
1. Open the Control Panel.
2. Click on the Printers and Faxes or Printers icon.