SMC Networks SMC7004ABR V.2 - Manual (Page 25)

Setting Up TCP/IP
21
Obtain IP Settings From Your Barricade™ Router
Now that you have configured your computer to connect to the
Barricade™ Router, it needs to obtain new network settings. By
releasing old IP settings and renewing them with settings from
the Barricade™ Router, you will also verify that you have
configured your computer correctly.
1. On the Windows desktop, click Start/Programs/Command
Prompt.
2. In the Command Prompt window, type IPCONFIG /RELEASE
and press the <ENTER> key.
3. Type IPCONFIG /RENEW and press the <ENTER> key. Verify
that your IP Address is now 192.168.2.xxx, your Subnet Mask
is 255.255.255.0 and your Default Gateway is 192.168.2.1.
These values confirm that the Barricade™ Router is
functioning.