SMC Networks SMC7004ABR V.2 - Manual (Page 28)

Configuring Client TCP/IP
24
Configuring Your Computer in Windows 2000
DHCP IP Configuration
1. Access your Network settings by clicking Start, then choose
Settings and then select Control Panel.
2. In the Control Panel, locate and double-click the Network and
Dial-up Connections icon.
3. Locate and double-click the
Local Area Connection icon
for the Ethernet adapter that
is connected to the
Barricade™ Router. When
the Status dialog box
window opens, click the
Properties button.
4. In the Local Area
Connection Properties box,
verify that the box next to
Internet Protocol (TCP/IP) is checked. Then highlight the
Internet Protocol (TCP/IP), and click the Properties button.
5. Select “Obtain an IP address automatically” to configure your
computer for DHCP. Click the OK button to save this change
and close the Properties window.
6. Click the OK button again to save these new changes.
7. Reboot your PC.
Obtain IP Settings From Your Barricade™ Router
See “Obtain IP Settings From Your Barricade™ Router” on page
21.