SMC Networks SMC7004ABR V.2 - Manual (Page 26)

Configuring Client TCP/IP
22
4. Type EXIT and press <ENTER> to close the Command
Prompt window.
Manual IP Configuration
1. Follow steps 1-5 in “DHCP IP Configuration” on page 19.
2. Check “Specify an IP
address” on the IP Address
tab. Enter an IP address
based on the default
network 192.168.2.x
(where x is between 2 and
254), use 255.255.255.0 for
the subnet mask. In the
Gateway field, add the IP
address of the Barricade™
Router (default:
192.168.2.1) and click
Apply.