SMC Networks SMC7004ABR V.2 - Manual (Page 36)

Configuring Client TCP/IP
32
Manual IP Configuration
1. Follow steps 1-2 in “DHCP IP Configuration” on page 29
2. Select Manually in the
Configure field.
3. Enter an IP address
based on the default
network 192.168.2.x
(where x is between 2
and 254), use
255.255.255.0 for the
subnet mask. In the
Router field, add the IP
address of the
Barricade™ Router (default: 192.168.2.1) and click Apply
Now.
4. Enter the IP address for the Barricade™ Router in the DNS
servers field. This automatically relays DNS requests to the
DNS server(s) provided by your ISP. Otherwise, add a specific
DNS server into the DNS Server sfield and click Apply now to
close the dialog box.
5. Record the configured information in the following table.
6. Click Apply now to apply the new settings then close the
dialog box.
TCP/IP Configuration Setting
IP Address ____.____.____.____
Subnet Mask ____.____.____.____
DNS Server ____.____.____.____
Default Gateway ____.____.____.____