SUPER MICRO Computer SUPERSERVER 6014P-8R - Manual (Page 29)

Chapter 3: System Interface
3-3
z
HDD: Indicates hard drive activity. On the SuperServer 6014P-8/
6014P-8R/6014P-82R/6014P-82 this light indicates SCSI and/or DVD-ROM
drive activity when flashing.
z
Power: Indicates power is being supplied to the system's power
supply module(s). With the 6014P-8/6014P-82, this LED should always be
green when the system is operating. On the 6014P-8R/6014P-82R, this LED
turns amber in the event of a power supply failure or if a power supply
cord is disconnected or loose.
3-4 SCSI Drive Carrier LEDs
Each SCSI drive carrier has two LEDs.
z Green: When illuminated, the green LED on the front of a SCSI drive
carrier indicates drive activity. A connection to the SCSI SCA backplane enables
this LED to blink on and off when that particular drive is being accessed.
z Red: A SAF-TE compliant backplane (standard on the 6014P-8/6014P-
8R/6014P-82R/6014P-82) activates the red LED, which indicates a drive
failure. If one of the SCSI drives fail, you should be notified by your system
management software. Please refer to Chapter 6 for instructions on remov-
ing and replacing SCSI drives.