SUPER MICRO Computer SUPERSERVER 6014P-8R - Manual (Page 57)

Chapter 5: Advanced Serverboard Setup
5-23
5-10 Onboard Indicators
GLAN LEDs
The Gigabit Ethernet LAN ports (lo-
cated beside the VGA port) each
have two LEDs. The left LED indi-
cates activity while the right LED
may be green, amber or off to indi-
cate the speed of the connection.
See table at right for the functions
associated with the second LED.
LED
Color
Off
Green
Amber
Definition
No Connection
10/100 MHz
1 GHz
GLAN Right LED
(Speed Indicator)
Speed LED
Activity LED
SCSI LEDs (DA1/DA2)
There are two SCSI LED indicators
on the serverboard. DA1 indi-
cates activity on SCSI Channel A
and DA2 indicates activity on SCSI
Channel B.
Unit Identifier
A Unit Identifier (UID) feature on
the server makes it easy to locate
the unit in a large stack. While
servicing the system, if you find
you need to work on the other
side of the unit, push the UID but-
ton (located on the far left of the
control panel on the front and to
the right of the VGA port on the
rear of the chassis) to illuminate
an LED on the other side of the
chassis. When you walk around
to the other side of the rack, the
unit will then be easy to spot. The
LED will remain on until the UID
button is pushed again. The rear
chassis UID is a button and LED in
one. The front control panel in-
cludes a separate LED and button.
UID: Front Chassis Location
Button
Button/LED
LED
UID: Rear Chassis Location
VGA Port