SUPER MICRO Computer SUPERSERVER 6014P-8R - Manual (Page 79)

Chapter 7: BIOS
7-5
IDE Channel 0 Master/Slave, IDE Channel 1 Master/Slave, IDE
Channel 2 Master, IDE Channel 3 Master
These settings allow the user to set the parameters of IDE Channel 0
Master/Slave, IDE Channel 1 Master/Slave, IDE Channel 2 Master, IDE
Channel 3 Master slots. Hit <Enter> to activate the following sub-menu
screen for detailed options of these items. Set the correct configurations
accordingly. The items included in the sub-menu are:
Type
Selects the type of IDE hard drive. The options are Auto, (which allows
BIOS to automatically determine the hard drive's capacity, number of
heads, etc.), a number from 1-39 to select a predetermined type of hard
drive, CDROM and ATAPI Removable. The option- "User" will allow the
user to enter the parameters of the HDD installed at this connection. The
option-"Auto" will allow BIOS to automatically configure the parameters
of the HDD installed at the connection. Choose the option 1-39 to select
a predetermined HDD type. Select CDROM if a CDROM drive is installed.
Select ATAPI if a removable disk drive is installed.