SUPER MICRO Computer SUPERSERVER 6014P-8R - Manual (Page 42)

5-8
S UPER S ERVER 6014P-8/6014P-8R/6014P-82R/6014P-82 User's Manual
Figure 5-5b. Top View of DIMM Slot
Figure 5-5a. Side View of DIMM Installation into Slot
To Install: Insert module vertically and press down until it snaps into
place. Pay attention to the bottom notch.
To Remove: Use your thumbs to gently push each release tab outward
to free the DIMM from the slot.
X6DHP-8G2: eight 240-pin DIMM slots that can support up to 16 GB of
registered ECC DDR2-400 SDRAM.
Both serverboards are designed to support 2 GB modules in each socket,
but have only been verified for up to 1 GB modules. Both employ an
interleaved memory configuration, which requires modules of the same size
and speed to be installed in pairs. You should not mix modules of different
sizes and/or speeds.
Memory Speed Jumpers (X6DHP-8G only)
Depending on what type of memory you use, you may need to change the
XJ4F1 and XJ4F2 (Memory Speed Select) jumpers. See pages 5-10, 5-11
and 5-20 for details.