SUPER MICRO Computer SUPERSERVER 6014P-8R User Manual

Page 93

Advertising
background image

Chapter 7: BIOS

7-19

Set Supervisor Password

When the item "Set Supervisor Password" is highlighted, hit the <Enter> key.

When prompted, type the Supervisor's password in the dialogue box to set

or to change supervisor's password, which allows access to BIOS.

Set User Password

When the item "Set User Password" is highlighted, hit the <Enter> key.

When prompted, type the user's password in the dialogue box to set or to

change the user's password, which allows access to the system at boot-

up.

Fixed Disk Boot Sector

This setting may offer some protection against viruses when set to Write

Protect, which protects the boot sector on the hard drive from having a

virus written to it. The other option is Normal.

Password on Boot

This setting allows you to require a password to be entered when the

system boots up. The options are Enabled (password required) and

Disabled (password not required).

Advertising
This manual is related to the following products: