SUPER MICRO Computer SUPERSERVER 6014P-8R - Manual (Page 89)

Chapter 7: BIOS
7-15
Console Redirection
Access the submenu to make changes to the following settings.
COM Port Address
This item allows you to specifies to redirect the console to Onboard COM
A or Onboard COM B. This setting can also be Disabled.
BAUD Rate
This item allows you to select the BAUD rate for console redirection. The
options are 300, 1200, 2400, 9600, 19.2K, 38.4K, 57.6K and 115.2K.
Console Type
This item allows you to choose from the available options to select the
console type for console redirection. The options are VT100, VT100,8bit,
PC-ANSI, 7bit, PC ANSI, VT100+, VT-UTF8.
Flow Control
This item allows you to choose from the available options to select the
flow control for console redirection. The options are: None, XON/XOFF,
and CTS/RTS.
Console Connection
This item allows you to choose select the console connection: either
Direct or Via Modem.
Continue CR after POST
Choose whether to continue with console redirection after the POST
routine. The options are On and Off.