2 processor and heatsink installation – SUPER MICRO Computer SUPERSERVER 6014P-8R User Manual

Page 36

Advertising
background image

5-2

S

UPER

S

ERVER 6014P-8/6014P-8R/6014P-82R/6014P-82 User's Manual

!

5-2

Processor and Heatsink Installation

When handling the processor package, avoid placing direct

pressure on the label area of the fan. Also, do not place the

motherboard on a conductive surface, which can damage the

BIOS battery and prevent the system from booting up.

Socket lever

CPU Installation

1. Lift the lever on the CPU socket:

Lift the lever completely as shown

on the picture on the right; other-

wise, you will damage the CPU

socket when power is applied. In-

stall CPU1 first.

IMPORTANT: Always connect the power cord last and always remove it before

adding, removing or changing any hardware components. Make sure that you

install the processor into the CPU socket before you install the CPU heat sink.

Pin 1

2. Insert the CPU in the socket,

making sure that pin 1 of the CPU

aligns with pin 1 of the socket (both

corners are marked with a triangle).

When using only one CPU, install it

into CPU socket #1. (Socket #2 is

automatically disabled if only one

CPU is used.)

3. Press the lever down until you

hear a *click*, which means the

CPU is securely installed in the

CPU socket. Repeat these steps

if you wish to install a second

CPU in socket#2.

Socket lever in the

locking Position

Advertising
This manual is related to the following products: