Sun Microsystems Sun Fire X4200 - Manual (Page 112)

9-6 Sun Fire X4100 and Sun Fire X4200 Servers System Management Guide • December 2005
The Reset Service Processor page appears.
FIGURE 9-3 Reset Dialog
2. Click the Reset SP button to reset the service processor.
The service processor reboots. The ILOM web GUI is unavailable while the service
processor reboots.
9.3 How to Reset the SP and BIOS
Passwords
This procedure causes the SP to reset the administration password and to clear the
BIOS password.
■ The administration (root) password becomes changeme.
■ The BIOS password is cleared, so that when you attempt to access the BIOS, it
does not prompt for a password.
When the jumper is installed, it causes the SP to reset these passwords during
power-up. To prevent these passwords from being reset whenever the server is
powered on, the procedure requires you to remove the jumper after resetting the
passwords.