System configuration using the sp gui, 1 how to set the sp session time-out, 1 before you begin – Sun Microsystems Sun Fire X4200 User Manual
Page 145: 2 what to do, How to set the sp session time-out, Before you begin, What to do
Advertising
11-1
C H A P T E R
11
System Configuration Using the SP
GUI
This chapter describes how to do system configuration using the SP GUI.
11.1
How to Set the SP Session Time-Out
This section explains how to set the time-out period for your ILOM Service
Processor session. Once you set the time-out period, if your session is inactive for
that amount of time, you will be logged out of the session automatically..
11.1.1
Before You Begin
Log in to the service processor (SP) as Administrator or Operator to reach the ILOM
web GUI.
11.1.2
What to Do
1. From the System Information tab, choose Session Time-Out.
The Session Time-out page appears.
Advertising