Sun Microsystems Sun Fire X4200 - Manual (Page 127)

Chapter 9 System Monitoring and Maintenance Using the SP GUI 9-21
c. To remove an SNMP community, click the Delete button.
A confirmation dialog box appears. Click OK to delete the SNMP community.
d. To add an SNMP user, click the Add button in the SNMP Users table.
The Add dialog box appears. Complete the following information. When you
have finished entering the information, click the Add button.
■
User name – Type a name that includes up to 35 characters. Start with an
alphabetic character and use no spaces.
■
Authentication protocol – Select either Message Digest 5 (MD5) or Secure Hash
Algorithm (SHA).
■
Authentication password and Privacy password – Type passwords that include
8 to 16 characters, which are case sensitive. Use any characters except a colon
or a space.
■
Confirm passwords – Retype the Authentication and Privacy passwords to
verify that they are correct.
e. To modify SNMP user properties, click the radio button of the user to modify,
then click the Edit button in the SNMP Users table.
The Edit dialog box appears. Complete the following information. When you
have finished entering the information, click the Edit button.
■ Authentication protocol – Select either Message Digest 5 (MD5) or Secure Hash
Algorithm (SHA).
■ Authentication password and Privacy password – Type passwords that include
8 to 16 characters, which are case sensitive. Use any characters except a colon
or a space.
■ Confirm passwords – Retype the Authentication and Privacy passwords to
verify that they are correct.
f. To remove an SNMP user, click the Delete button in the SNMP Users table.
A confirmation dialog box appears. Click OK to delete the SNMP user.
9.9 How to Control the Server Locator
Indicator
This section explains how to turn the Locator indicator on the Sun Fire X4100 or Sun
Fire X4200 server on and off.