Sun Microsystems Sun Fire X4200 - Manual (Page 161)

13-1
C H A P T E R
13
Managing Users Using the SP GUI
This chapter describes how to do manage users using the SP GUI.
13.1 How to Add an SP User Account
This section explains how to add a user account for the ILOM Service Processor.
A user account is a record of essential local user information that is stored on the
service processor. There can be up to 10 user accounts on the service processor.
However, you cannot delete the root or anonymous accounts. Therefore, you can
configure eight accounts for the service processor. Each account has an associated
user name, password, and role.
13.1.1 User Roles and Privileges
Each user account consists of a user name, a role, and assigned privileges. A user
can have one of these roles:
■ Administrator - Enables access to all service processor features, functions, and
commands.
■ Operator - Enables limited access to service processor features, functions, and
commands.
The Administrator assigns the user name and user role to the account. The
Administrator also assigns the network and serial privileges to the user account.
■ Network privileges - Enable remote access privileges, either Administrator or
Operator.
■ Serial privileges - Enable local privileges, either Administrator or Operator.