Charging the battery pack 1, Preparation – Sharp VL-Z7U User Manual

Page 22

Advertising
background image

8

Preparation

Preparation

Charging the Battery
Pack

1

Attach the battery pack on the
camcorder, and make sure that the
Power switch is set to OFF.

2

Open the DC IN jack cover.

3

Insert the DC plug into the DC IN
jack of the camcorder (1), and plug
the AC plug into a power outlet (2).

• The POWER/CHARGE (RED)

indicator lights up red.

• The POWER/CHARGE (RED)

indicator turns off when the battery is
charged.

4

Remove the DC plug from the DC IN
jack, then remove the AC adapter
from the power outlet.

• The chart specifies the approximate times in

minutes.

Notes:
Charge the battery pack between 50°F and

86°F (10°C and 30°C). The battery pack
may not charge properly at temperatures
too low or too high.

The battery pack and AC adapter become

warm during charging. This is not a
malfunction.

Using the zoom (see page 23) and other

functions or turning the power on and off
frequently will increase power consump-
tion. This may result in a decrease in the
actual recording time compared to the
maximum continuous recording time listed
above.

The charging time and recording time may

vary depending on the ambient tempera-
ture and the condition of the battery pack.

• See pages 98 and 99 for more information on

using the battery pack.

• Charge only SHARP model BT-L226 battery

packs. Other types of battery packs may
burst, causing personal injury and damage.

• When attaching the supplied audio/video/S-

video cable or USB cable, remove the DC
plug, open the terminal cover and connect it.

BT-L226

Charging

time

Battery

pack

Max.

continuous

recording time

Max.

continuous

playback time

on LCD

120

115

100

Charging time and maximum
continuous recording and playback
times in Tape modes

LCD

closed

LCD

open

100

DC IN jack cover

DC plug

To power outlet

DC IN jack

AC plug

POWER/CHARGE (RED)

indicator

Advertising