Sharp VL-Z7U - Manual (Page 59)

45
Useful Features
Windbreak
Available mode:
Tape Camera
The windbreak function allows you to
reduce annoying noise from strong winds
when recording.
1
In Tape Camera mode, press the
DISPLAY button until the mode
screen appears (see page 31).
2
Press l or m on the Operation
button to select “MENU”, then press
the center of the Operation button.
3
Press l or m to select “EXECUTE”,
then press the center of the Operation
button.
4
Press l or m to select Y, then
press the center of the Operation
button.
5
Press l or m to select “WIND”, then
press the center of the Operation
button.
6
Press l or m to select “ON”, then
press the center of the Operation
button.
7
Press the DISPLAY button to turn off
the menu screen.
To cancel Windbreak
Select “OFF” in step 6 above.
Note:
• Keep the windbreak function off during
normal recording. If left on, the recorded
audio may sound somewhat muffled when
played back.
1
Mount the optional zoom microphone
to the camcorder.
2
In Tape Camera mode, press the
DISPLAY button until the mode
screen appears (see page 31).
3
Press l or m on the Operation
button to select “MENU”, then press
the center of the Operation button.
4
Press l or m to select “EXECUTE”,
then press the center of the Operation
button.
5
Press l or m to select T, then
press the center of the Operation
button.
6
Press l or m to select “ZOOM MIC”,
then press the center of the Operation
button.
7
Press l or m to select the desired
zoom microphone mode, then press
the center of the Operation button.
8
Press the DISPLAY button to turn off
the menu screen.
When the zoom microphone is active, the
zoom microphone indicator appears and
the zoom range indicator changes as shown
below.
S E T T I N G 1
Q K .
D G T L
R E T U R N
Z O OM M I C
Z O OM
T A P E S P E E D
A U T O
T E L E
O F F
R E T U R N
T E L E ZOOM M I C
S E T T I N G 2
D I S
1 6 9 :
A U D I O MO D E
R E T U R N
W I N D O F F
ON
ON W I ND
W T 1 0 Z OOM
Zoom range indicator
Zoom microphone indicator