Speco Technologies SIPT5 - Manual (Page 25)

2-21
2.3.2 Host Setting
This section tells you how to setup IP device’s host settings and LAN
settings.
z STEP 1: Click the [Host Setting] on the “Main Setup page”.
The “Host setting page” is displayed as below.
z STEP 2: Configure these settings with reference to the table below. If you
are still unsure what to set, contact your system administrator.
■
Host Setting
Parameters Description
Host name
Enter a host name, and this host name will be shown when you
use the IP utility or the SDK to search for the IP device.
Language
Select the language of default user-interface. Each user login
will see the default user-interface first.