Speco Technologies SIPT5 - Manual (Page 29)

2-25
z STEP 3: Click the [Apply] button of each setting to confirm the
settings or click the [Reset] button to re-enter the parameters.
NOTE: Be sure to set the Network Connections Type to Auto
Negotiation to respective apparatus connected to this IP device via
network. Otherwise, the maximum transmission performance might not
be achieved. This is because the IP device follows MII standard.
NOTE: Check with your system administrator, if Client PC and IP
device are setting in different VLANs, please connect to WAN port.
NOTE: Once finished all settings, be sure to click the [Save Reboot]
button, otherwise, some settings won’t take effect.