Speco Technologies SIPT5 - Manual (Page 61)

2-57
3. WHITE BALANCE (WITE BAL.)
For color control on the screen, use ‘WHITE BALANCE’ function.
a. Press the SET button to display the SETUP menu and move
arrow indicator to ‘ WHITE BALANCE ’ using the UP or
DOWN button.
b. SET ‘ WHITE BALANCE ’ to the desired mode using the LEFT
or RIGHT button.
ATW (Auto Tracking White Balance)
: When color temperature is 2400 ~ 12000K, select this mode.
(Ex. A fluorescent lamp, outdoor)
AWC (Auto White Balance Control)
: The white balance is automatically adjusted in a specific
environment. In order to obtain the best result, press the set
button while the camera focuses on white paper. If the
environment including the light source is changed, you have
to adjust the white balance again.
Manual : To fine adjust, select the Manual mode. You can
increase or decrease the red or blue factor while monitoring
the difference on the screen. Set to ‘Manual, mode and press