Speco Technologies SIPT5 - Manual (Page 26)

2-22
■
Network link speed & duplex
Parameters Description
WAN port
This item lets you select the network transmission speed of
WAN port. You can select from
1. Auto detect (default setting)
2. 100Mbps / Full duplex
3. 100Mbps / Half duplex
4. 10Mbps / Full duplex
5. 10Mbps / Half duplex
■
Port Mapping
Parameters Description
TOS (type of
service)
Select whether to add the TOS tag onto the streaming data.
Streaming data with a higher priority TOS tag will be transmitted
first while compared with other data to be transmitted.
TOS priority
Select the TOS tag’s priority to be added onto the streaming.
You can select between
1. Normal-Service
2. Minimize-Cost
3. Maximize-Reliability
4. Maximize-throughout
5. Minimize-Delay
■
ToS (Type of Service)
Parameters Description
HTTP port Select the port for this IP device to use HTTP protocol.
Search server
port1 Select the port1 for this IP device to support search function of
the application program (e.g. IP utility).
Search server
port2 Select the port2 for this IP device to support search function of
the application program (e.g. IP utility).
z STEP 3: Click the [Apply] button of each setting to confirm the
settings or click the [Reset] button to re-enter the parameters.
NOTE: Check with your system administrator, if Client PC and IP device
are setting in different VLANs, please connect to WAN port.
NOTE: Be sure to set the Network Connections Type to Auto
Negotiation to respective apparatus connected to this IP device via
network. Otherwise, the maximum transmission performance might not
be achieved. This is because the IP device follows MII standard.
NOTE: Once finished all settings, be sure to click the [Save Reboot]
button, otherwise, some settings won’t take effect.