Speco Technologies SIPT5 - Manual (Page 89)

2-85
H. ALARM SET
4 Alarm inputs are available and each alarm is activating to presets, group
tours or patterns.
H-1. ALARAM SET – ALARM NO.
Up to 4 alarms are selectable by using five keys to the right direction
when cursor is on ALARM NO.
H-2. ALARAM SET – ALARM INPUT
Input alarm ways provide two different ways as NC (Normal Close) or NO
(Normal Close)
The default setting is OFF
H-3. ALARAM SET – ALARM ACT
Alarm activates various surveillance modes with Preset number up to 165,
Group tour up to 8, Pattern up to 8. Move five keys to the right or left
direction to select any preset number, group tour no. or pattern no.
H-4. ALARAM SET – SAVE
After setting the alarm input ways and activation, to save the data, move
five keys to the right direction when the cursor is on SAVE. After saving
the data, the cursor moves to Alarm NO.2 automatically to prepare the
next alarm.
H-5. ALARAM SET – EXIT
To escape this page, move five keys to the right direction
* Before activating Alarm, user must set ALARM ENABLE at DOME
SET – ALARM – ENABLE (Refer to page 15)
ALARM SET
ALARM NO : 01
ALARM INPUT: OFF
ALARM ACT : 001
SAVE
EXIT
DEFAULT SETTING