Speco Technologies SIPT5 - Manual (Page 69)

2-65
8. SYNC
Two SYNCHRONIZATION modes are available… INTERNAL and
EXTERNAL LINE-LOCK. In LINE_LOCK mode, the camera sync to
the 60HZ phase.
a. Press the SET button to display the SETUP menu and move
arrow indicator to ‘ SYNC’ us ing the UP or DOWN button.
b. SET to the desired mode using the LEFT or RIGHT button.
INT : Internal synchronization
L/L : if you choose ‘L/L’, you can adjust the desired phase.
- Press the SET button.
- You can adjust the desired phase from 0 to 270.
NOTE: Line Lock is only available in the 24-volt AC mode of
operation.
In 12volts DC, the SYNC menu is always in the ‘ INTERNAL'; mode.