Speco Technologies SIPT5 - Manual (Page 35)

2-31
2.3.6 Video Adjustment
This section tells you how to adjust the streaming video.
z STEP 1: Click the [Video Adjust] on the “Main Setup page”.
The “Video adjust page” is displayed as below
z STEP 2: Set the c heckbox to enable motion detection function.
z STEP 3: Set the sensitivity of motion detection windows.
z STEP 4: Set the interval time of motion detection. . Within the
interval time after the motion event is triggered, no motion event will
be triggered.
z STEP 5: Set the trigger threshold of motion detection windows.
z STEP 6: In motion activity window , the bar shows the motion
activity status. You can also see the trigger threshold (Red line). When
the motion activity exceeds the trigger threshold, the bar would
become red to indicates an motion event is triggered. While viewing at