Speco Technologies SIPT5 - Manual (Page 83)

2-79
press FOCUS FAR button again after setting a preset location.
C-4. PRESET – SAVE
Move five keys to the right direction when the cursor is at SAVE and then
the cursor will be located on Preset ID for the continuous preset No.
setting.
C-5. PRESET – EXIT
To escape this page, move five keys to the right direction.
D. AUTO SCAN SET
D-1. AUTO SCAN- START ANGLE
To set start angle, press FOCUS FAR button then move five keys to the
starting angle which is needed memorized. To press FOCUS FAR
button again is to escape.
D-2. AUTO SCAN- END ANGLE
To set end angle, press FOCUS FAR button then move five keys to the
starting angle which is needed memorized. To press FOCUS FAR
button again is to escape.
D-3. AUTO SCAN – DIRECTION
Auto Scan directions are available with two direction as CW or CCW by
five keys to the right or left direction
AUTO SCAN SET
START ANGLE : XXX.X.XX.X
END ANGLE : XXX.X.XX.X
DIRECTION : CW
ENDLES : OFF
SPEED : 10°/S
DWELL TIME: 03
SAVE AND EXIT
EXIT
DEFAULT SETTING