Speco Technologies SIPT5 - Manual (Page 90)

2-86
I. SECTOR SET
Up to 8 programmable sectors are available with 16 characters.
This feature is useful to memory the certain location such as parking zone
or so on.
When camera goes through this area, it shows the letter you memorized.
I-1. SECTOR SET – SECTOR NO.
Up to 8 programmable sectors set by the five keys are available.
I-2. SECTOR SET – SECTOR ID
set SECTOR ID, select up to 16 characters by using five keys to the left
or right.
Press ZOOM TELE button to move to the next character from the left to
the right direction and ZOOM WIDE button to move to the next character
from the right to left direction (Space displays when
I-3. SECTOR SET – SECTOR START
To set SECTOR START angle, press FOCUS FAR button then move five
keys to the left or right direction to set the position. To press FOCUS
FAR button again is to escape.
I-4. SECTOR SET – SECTOR END
To set SECTOR END angle, press FOCUS FAR button then move five
keys to the left or right direction to set the position. To press FOCUS FAR
button again is to escape.
SECTOR SET
SECTOR NO : 01
SECTOR ID : SECTOR01□□□□□□□□
SECTOR START: XXX.X.XX.X
SECTOR END : XXX.X.XX.X
SAVE
EXIT
DEFAULT SETTING
Start Position
End Position