Speco Technologies SIPT5 - Manual (Page 92)

2-88
2.4.5 DIP SW SETTING (SIPSD10X only)
Mini Speed Dome camera provides up to 63 camera ID and it’s adjustable
ID with 1
st ~6 th of Dip switch
Open the camera case, set ID using DIP SW1.
* Factory default: Camera ID = 1, PELCO-D
2.4.6 ID SETTING (SIPSD10X only)
(1-ON, 0-OFF)(1Î10)
DIP SW ID VALUE DIP SW ID VALUE DIP SW ID VALUE
100000XXXX 1 111010XXXX 23 101101XXXX 45
010000XXXX 2 000110XXXX 24 011101XXXX 46
110000XXXX 3 100110XXXX 25 111101XXXX 47
001000XXXX 4 010110XXXX 26 100011XXXX 48
101000XXXX 5 110110XXXX 27 100011XXXX 49
011000XXXX 6 001110XXXX 28 010011XXXX 50
111000XXXX 7 101110XXXX 29 110011XXXX 51
000100XXXX 8 011110XXXX 30 001011XXXX 52
100100XXXX 9 111110XXXX 31 101011XXXX 53
Termination
Protocol
ID Set
Baud rate
Deleted: <sp>