Konica Minolta Chroma Meter CS-200 - Manual (Page 10)

8
Standard Accessory
Lens Cap
• Attached to objective lens for protecting it
when not using this instrument.
Holding Cap CS-A24
• Prevents measuring angle selector position
from deviating during transfer. Remove one
when using this instrument and store not
to lose. Do not fail to set measuring angle
selector at center 0.2˚ for transfer before at-
taching this holding cap to measuring angle
selector.
ND Eyepiece Filter CS-A27
• Eases glare when peeping into finder to
measure high luminance object. Always set
this filter on finder when measuring high
luminance object.
AC Adapter AC-A23
• Supplies power from AC outlet.
Input: 100 V - 120 V
or 200 V - 240 V ,
1.0 A 50/60 Hz, 30-45 VA
Output: 5 V 2.8 A
Data Management Software
CS-S10w Standard
• Software to control this instrument from PC
for data management
USB Cable (2 m) IF-A17
• Used for communication between this
instrument and PC.