Konica Minolta Chroma Meter CS-200 - Manual (Page 60)

58
S
e
tt
in
g
Setting Internal Clock
This instrument is equipped with internal clock to record measurement time.
Although measurement date and time are not indicated in this instrument, one can be
output together with measurement value when this unit is controlled with PC.
If used with either standard accessory data management software CS-S10w Standard or
optional CS-S10w Professional, measurement time is to display together with measure-
ment value.
∗ Internal clock adjustment has been completed before shipment form factory.
Operation Procedure
1.
Press ESC key when menu or target
value setting menu appears.
Measurement screen appears on LCD screen.
2.
Make sure that [ ] appears on left
bottom indicating this instrument
has been set for SHIFT mode.
If [SFT] appears instead, it means that
instrument is to operate in SHIFT mode.
Press
SHIFT key to cancel SHIFT mode.
3.
Press MENU key three times.
Menu 3/4 screen appears on LCD screen.
2 3 1, 9 8
6
4, 5
D
A
T
E &
T
IM
E
CH00:
<
DEFAULT
>
Lv 20.80
cd/m 2
x 0.4476
y 0.4477
<
MODE
>
SINGLE
[ ]  [ 2° ]
<
ANGL
>
1° VIEW
<
SPD
>
AUTO
<
SYNC
>
200.00Hz
<
LENS
>
STANDARD
<
MEM
>
AUTO NUM
<
MEMORY DATA
>
M OOO :(NO DATA)
Lv ------
x ------
y ------
<
MENU
>
3/4
SLEEP MODE OFF
DATE & TIME
BUZZER
VERSION
BREAK : [ESC]
[ ]  [ 2° ]