Konica Minolta Chroma Meter CS-200 - Manual (Page 20)

18
In
st
all
in
g LCD Screen
Measurement Screen
CH00 :
<
DEFAULT
>
<
PEAK
>
Lv 7.09
cd/m 2
x 0.3369
y 0.3256
<
MODE
>
SINGLE
[ ]  [ 2° ]
<
ANGL
>
1° VIEW
<
SPD
>
AUTO
<
SYNC
>
NO SYNC
<
LENS
>
STANDARD
<
MEM
>
AUTO NUM
<
MEMORY DATA
>
M001 : SAMPLE1
Lv 38.09
x 0.4039
y 0.3815
Setting status in this instrument is dis-
played.
<ANGL>
Currently selected measuring angle is
displayed.(1°,0.2°,0.1°)(p.88)
<SPD>
Currently selected measuring time is
displayed.(AUTO,LTD.AUTO, S-FAST,
FAST, SLOW, S-SLOW, MANU)(p.28)
<SYNC>
Synchronization frequency is displayed
when internal sync measurement mode
is set; NO SYNC is displayed when it is
not set.(p.30)
<LENS>
Currently selected lens type is displayed
.(STANDARD,No.107,No.122)(p.40)
<MEM>
Update method for directory to store
measurement value is displayed.(AUTO
NUM,MAN NUM,AUTOSAVE)(p.46)
Measurement
value ID name
(p.92)
Stored data is displayed.(p.90)
Currently selected observer angle is
displayed.(2°,10°)(p.32)
Battery level mark ( , )(p.24)
 is displayed when the finder shutter is set to au-
tomatically close for every measurement;  is dis-
played when set to always open.(p.48)
[SFT] is displayed when this instrument is in SHIFT
mode; [ ] is displayed when SHIFT mode is released.
Memory channel
SINGLE is displayed when
the measurement mode
is set to “Single measure-
ment”; CONT. is displayed
when set to normal screen
for “Continuous mode”.
(p.42)
Nothing is displayed here
when set to <PEAK> or
<VALLEY> for“Continuous
mode”.
Measurement result
is displayed in the
currently selected
color space. (L
v
xy,
L
v
u'v', L
v
T∆uv,
XYZ ,Dominant
wavelength)(p.34)
CH ID name(p.74)
Calibration channel(p.62)
<PEAK> is displayed when the mea-
surement result was obtained at
<PEAK> for “Continuous mode”;
<VALLEY> is displayed when the mea-
surement result was obtained at <VAL-
LEY> for “Continuous mode”.(p.44)
Nothing is displayed here when it was
obtained at “Single measurement” or
normal screen for “Continuous mode”.