Konica Minolta Chroma Meter CS-200 - Manual (Page 24)

22
In
st
all
in
g
Connecting AC Adapter Connecting AC Adapter
Either AC adapter(accessory) or 4 AA size batteries(commercially available) can be used
as power source of this instrument.
Warning
(Failure to adhere to the following points may result in death or serious injury.)
Always use the AC adapter and power cord supplied as a standard accessory
or optional (AC-A23), and connect it to indoor AC outlet of rated voltage and
frequency. Failure to follow either of these may result in damage to unit, fire or
electric shock.
If this instrument is not used for a long time, disconnect AC adapter from AC
outlet.
Accumulated dirt or water on prongs of AC adapter plug may cause fire and
should be removed.
Do not forcibly pull any part on power cord when unplugging since this may
cause fire or electric shock. Gently disconnect by holding plug. Also, do not
handle power cord with wet hands. Doing so may cause electric shock.
Do not forcibly bend, twist or pull power cord. Also, do not place heavy object
on power, or damage or modify one. Any of these may cause fire or electric
shock due to damage to power cord.
Do not disassemble or modify this instrument or AC adapter. Doing so may
cause fire or electric shock.
Should this instrument or AC adapter be damaged or smoke or odd smell be
generated, do not keep using one without correction. Doing so may cause fire.
In such situations, switch power off immediately, unplug AC adapter (or remove
batteries in using ones) and contact the nearest KONICA MINOLTA SENSING
authorized service facility.
Caution
U se this instrument near AC outlet for easy plugging or unplugging in using AC
adapter.
(Failure to adhere to following points may result in injury or
damage to instrument or other property.)