Kathrein MSK 25 - Manual (Page 35)

TV measurement
35
Frequency Display and Frequency Entry
You first have to enter the required picture carrier frequency to be able to
measure the level of a TV reception signal.
Frequency entry is possible from 48 MHz to 858 MHz in 50 kHz steps.
TV Frequency Entry Mode
[SAT/TV] Changing over to TV reception
[CH-FRQ] Change-over channel/frequency
[0] bis [9] Entering frequency
[ENTER] Confirming entry
[+] und [-] Varying frequency stepwise
Example
Entering frequency 175.25 MHz:
Press [2ndF] [CH/FRQ] .....................(frequency menu call up)
Then press [1] [7] [5] [./S] [2] [5] [ENTER] ...........(frequency entry)
LC display:
• Frequency: 175.25 MHz
• Level: 65.0 dBµV
• Mode: TV analogue
Note
If you had called up the frequency menu before, you now only need to
enter the figures in order to enter a frequency.
The last frequency entry will be retained even after you have switched off
the MSK 25, provided that the entry was carried out via numeric
character input, ending with ‚MHz‘
✐
☞
À
CH:175,25 TV
LEV: 65,0dBuV A