Tv measurement – Kathrein MSK 25 User Manual
Bearing for Individual Reception Frequencies
The „LEVEL ♫“ function allows the antenna alignment to maximum
received signal via bearing. The level tendency can be bargraph-
displayed. The measurement range can be adjusted to three different
The level can be monitored with an acoustic signal, the pitch of which is
proportional to the received-signal level. The volume of the directional
radio audio signal can be adjusted with the volume regulator.
[2ndF] [LEVEL ♫]
Changing over to bearing mode:
Change-over of the measurement range of the bar
graph. The measurement range is automatically
Level range 1:
high input levels
Level range 2:
medium input levels
Level range 3:
low input levels
• Level range 2: medium input level
• Mode: TV
• Bargraph display
Calling up „LEVEL ♫“ mode:
Press [2ndF] [LEVEL ♫].
Move the antenna until the maximum amplitude of the bargraph display is
If necessary, diminish or elevate the sensitivity by pressing either [-] or
Repeat this procedure until the maximum level is reached.
Closing LEVEL mode:
Press [2ndF] twice.