Kathrein MSK 25 - Manual (Page 43)

FM measurement
43
Bearing for Individual Reception Frequencies
The „LEVEL ♫“ function allows the antenna alignment to maximum
received signal via bearing. The level tendency can be bargraph-
displayed. The measurement range can be adjusted to three different
sensitivity levels.
The level can be monitored with an acoustic signal, the pitch of which is
proportional to the received-signal level. The volume of the acoustic
signal can be adjusted with the volume regulator.
Bearing Menu
[2ndF] [LEVEL ♫] Changing over to bearing mode
[-] [+] Change-over of the measurement range of the bar
graph. The measurement range is automatically
preselected.
Level range 1: high input levels
Level range 2: medium input levels
Level range 3: low input levels
[2ndF] [2ndF] Exit
LC display:
• Level range 2: medium input level
• Mode: TV
• Bargraph display
Example
Calling up „LEVEL ♫“ function:
Press [2ndF] [LEVEL ♫].
Move the antenna until the maximum amplitude of the bargraph display is
reached.
If necessary, diminish or elevate the sensitivity by pressing either [-] or
[+]
Repeat this procedure until the maximum level is reached.
Closing LEVEL mode:
Press [2ndF] twice.
À
LEV-RANGE:2 FM
> ■■■■
✐