Maintenance work on chassis and engine – KTM Supermoto 690 User Manual
Page 105

MAINTENANCE WORK ON CHASSIS AND ENGINE
103
100161-10
ದ
Pull the parking light bulb
b
out of the holder.
ದ
Check parts for damage and wear. Replace damaged or worn parts.
ದ
Insert a new parking light bulb in the holder.
Parking light
b(W2,1x9,5d) (
P. 143)
ದ
Refit the headlight mask with the headlight. (
P. 100)
Changing flasher bulb
Note
Damage to reflector
ಘKeep the glass of the bulb free of grease.
ದ
After fitting the bulb in the holder, clean the glass with a clean cloth. Any grease on the glass will evaporate by the heat and be de-
posited on the reflector.
100160-10
ದ
Remove the screw on the rear of the flasher housing.
ದ
Carefully swing the diffuser
b
forwards and remove it.
ದ
Press the flasher bulb carefully into the holder, turn it about 30° counterclockwise and
remove it from the holder.
Info
Do not touch the reflector with your fingers and try to avoid contact will oil or
grease.
ದ
Check parts for damage and wear. Replace damaged or worn parts.