KTM Supermoto 690 - Manual (Page 119)

MAINTENANCE WORK ON CHASSIS AND ENGINE
117

Adjusting the handlebar angle b
x
100196-10
ದ Loosen screw b  .
ದ Move the handlebar to the desired position and slightly tichten the screws.
ದ Move the handlebar carefully in both directions as far as it will go.
» If the handlebar instruments touch the fuel tank:
ದ Correct the handlebar angle.
Info
The distance between the handlebar support and the handlebar clamp
must be the same at the front and rear.
ದ Fully tighten screw b  .
Specification
Screw, handlebar clamp M8 20 bNm (14.8blbfbft)

Checking engine oil level
Info
The engine oil level must be checked when the engine is at operating temperature.
ದ Stand the motorcycle upright on a horizontal surface.