KTM Supermoto 690 - Manual (Page 114)

MAINTENANCE WORK ON CHASSIS AND ENGINE
112
100189-10
ದ Remove the radiator cap b  and the bleeder screw b  .
ದ Tilt the vehicle slightly to the right.
100190-10
ದ Pour coolant in until it overflows free of bubbles, and then replace the bleeder screw
immediately.
Alternative 1
Coolant ( P. 152)
Alternative 2
Coolant (mixed ready to use) ( P. 152)
ದ Fill the radiator completely with coolant. Refit the radiator cap.
ದ Place the vehicle on the side stand. Point the fuel tank forwards.
Danger
Danger of poisoning ಘExhaust gases are poisonous and can result in
unconsciousness and/or death.
ದ When running the engine, always make sure there is sufficient ventilation,
and do not start or run the engine in a closed space.
ದ Start the engine and run it until the 5th bar of the temperature indicator lights up.