KTM Supermoto 690 - Manual (Page 91)

MAINTENANCE WORK ON CHASSIS AND ENGINE
89

Removing the seat
100108-10
ದ Insert the ignition key in the seat lock b  and turn it 45° counterclockwise.
ದ Lift up the seat at the rear, pull it back and remove from above.

Mounting the seat
400155-01
ದ Suspend the seat on the screw b  , press the rear downwards and at the same time push
it forwards. The two projections b  must be inserted into the frame.
ದ Push the locking pin b  into the lock housing and push the back of the seat down until
the locking pin locks in place with an audible click.
ದ Remove the ignition key from the seat lock.
ದ Finally, check that the seat is correctly mounted.