Maintenance work on chassis and engine – KTM Supermoto 690 User Manual
Page 85
MAINTENANCE WORK ON CHASSIS AND ENGINE
83
100145-10
ದ
Pull the rear wheel and brake caliper support
b
together to the rear until you can swing
the brake caliper support to the side.
Warning
Danger of accidents
ಘReduced braking due to damaged brake discs.
ದ
Always lay the wheel down in such a way that the brake disc is not damaged.
ದ
Take the rear wheel out of the swing arm.
Info
Do not operate the foot brake when the rear wheel is removed.
Fitting rear wheel
b
x
Warning
Danger of accidents
ಘReduced braking due to oil or grease on the brake discs.
ದ
Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
Warning
Danger of accidents
ಘNo braking effect when operating the rear brake.
ದ
After installing the rear wheel, always operate the footbrake until the pressure point is reached.
ದ
Checking the rear hub rubber dampers.
b
x
(
P. 85)