Ba maintenance work on chassis and engine – KTM Supermoto 690 User Manual
Page 106
B
A
MAINTENANCE WORK ON CHASSIS AND ENGINE
104
ದ
Press the new flasher bulb carefully into the holder and turn it clockwise as far as it will
go.
Flasher light
b(BAU15s) (
P. 144)
ದ
Position the diffuser.
ದ
Insert the screw and turn it first counterclockwise until you feel it click into the thread.
Tighten the screw.
ದ
Check the flasher function.
Checking headlamp setting
100159-10
ದ
On a light-colored wall with a horizontal area in front of it, make a mark as high as the
center of the low beam headlight.
ದ
Make another mark at a distance of
b
under the first mark.
Specification
Distance
b
5
bcm (2bin)
ದ
Stand the motorcycle at a distance of
b
in front of the wall and switch on the low
beam.
Specification
Distance
b
5
bm (16bft)
ದ
Check the headlamp setting.
The boundary between light and dark must be exactly on the lower mark for a motor-
cycle with driver.
»
If the boundary between light and dark does not meet specifications:
ದ
Adjust the headlight range. (
P. 105)